Fixed Gas Detectors

Product Details:

Gas Detection: ETO

Measure range: 0-100ppm

Resolution:0.01ppm

1. Data display, with one set of relay output

2. Power supply: 24V DC

3. Signal output: 4-20mA

4. Dimension of product: 180×150×90mm

5. Dimension of packing: 30x22x15cm

6. Gross Weight: 4KG

7. Net Weight: 1.6KG

8. Working temperature: -40~+65??? Humidity: 0-95%RH

9. Approvals: ATEX

10. Protection: IP65

Additional Information:

• Delivery Time: 2 TO 3 WEEKS

Product Details:

Gas Detection: Co2

Measure range: 0-5000ppm Resolution:0.01ppm

1. Data display, with one set of relay output

2. Power supply: 24V DC

3. Signal output: 4-20mA

4. Dimension of product: 180×150×90mm

5. Dimension of packing: 30x22x15cm

6. Gross Weight: 4KG

7. Net Weight: 1.6KG

8. Working temperature: -40~+65  Humidity: 0-95%RH

9. Approvals: ATEX

10. Protection: IP65

Additional Information:

• Delivery Time: 2 TO 3 WEEKS
• Packaging Details: STANDARD Dimension of packing: 30x22x15cm

Product Details:

VOC 0-100ppm Electrochemical sensor

Certified : ATEX, CE,EMC,ISO9001

Technical Specification

Gas Detected: VOC

Detection Principle : Electrochemical

Install Method : Wall-mounted, piping type, flow-type(according to the detected environment)

Measure Range : 0-100PPM

Resolution : 0.01PPM

Precision : ±2% F.S.

Output signal : 4-20MA???RS485???relay (optional)

Response Time : ≤10S

Repeatability : ≤±1%

Zero shift : ≤±1%???F.S/year???

Connection mode : G1/2 external thread explosion-proof flexible pipe

Temperature : -30??????70???

Explosion-Proof : Ex d???CT6

Alarm mode : Sound, light

Dimensions : 180×150×90mm

Recovery Time : ≤10S

Linearity error : ≤±1%

Display : High light nixie tube display

Gas unit : PPM

Humidity : 0-95%RH

Degree of protection : IP65

Operating time : 24h

Weight : ≤1.6kg

Additional Information:

• Delivery Time: 2 TO 3 WEEKS
• Packaging Details: STANDARD

Product Details:

 Gas Detected : O3

 Detection Principle : Electrochemistry,

 Sampling Method :Pumping suction, flow rate can up to 1L/min, ten grades of pumping suction for

selection.

 Measure Range : 0-10PPM,

 Resolution : 0-0.1PPM

 Precision :3%F.S

Outputsignal : High-speed data transmission by USB, available for data downloading

and printing

 Response Time : ≤10S

 Repeatability : ≤±1%

 Zero shift : ≤±1%???F.S/year???

 Temperature : Working temperature???-20??????50???

 Explosion-Proof : Exia???CT4

 Alarm mode : Sound, light, vibration

 Dimensions : 205*75*32mm

 Recovery Time : ≤10S

 Linearity error : ≤±1%

 Display : LCD dot matrix display

 Gas unit : Units are switchable

 Humidity : 0-95%RH

 Degree of protection : IP66

 Operating time : 100h (pump off)

Weight : 240grm

Additional Information:

• Delivery Time: 2 TO 3 WEEK

Product Details:

Gas Detected : HF

 Detection Principle : Electrochemical

 Install Method : Wall-mounted, piping type, flow-type(according to the detected environment)

Measure Range : 0-10PPM.

 Resolution : 0.01PPM

 Precision :2%F.S

 Output signal : 4-20MA???RS485???relay (optional)

 Response Time : ≤10S

 Repeatability : ≤±1%

 Zero shift : ≤±1%???F.S/year???

Connection mode : G1/2 external thread explosion-proof flexible pipe

 Temperature : -30 70

 Explosion-Proof : Ex d CT6

 Alarm mode : Sound, light

 Dimensions : 180×150×90mm

 Recovery Time : ≤10S

Linearity error :≤±1%

Display : High light nixie Display tube display

 Gas unit : PPM

 Humidity : 0-95%RH

 Degree of protection : IP65

 Operating time : 24h

 Weight : ≤1.6kg

Additional Information:

• Delivery Time: 2 TO 3 WEEKS
• Packaging Details: STANDARD

Product Details:

 Gas Detected : HCN

 Detection Principle : Electrochemical

 Install Method : Wall-mounted, piping type, flow-type(according to the detected environment)

 Measure Range : 0-100PPM.

 Resolution : 0.01PPM

 Precision : 2%F.S

 Output signal : 4-20MA RS485???relay (optional)

 Response Time : ≤10S

 Repeatability : ≤±1%

 Zero shift : ≤±1 F.S/year

Connection mode : G1/2 external thread explosion-proof flexible pipe

 Temperature : -30 70

 Explosion-Proof : Ex d CT6

 Alarm mode : Sound, light

 Dimensions : 180×150×90mm

 Recovery Time : ≤10S

 Linearity error : ≤±1%

Display : High light nixie Display tube display

 Gas unit : PPM

 Humidity : 0-95%RH

 Degree of protection : IP65

 Operating time : 24h

 Weight : ≤1.6kg

Additional Information:

• Delivery Time: 2 TO 3 WEEKS
• Packaging Details: STANDARD

Product Details:

1. Sampling method: Diffusion

2. Detected gas: LPG Gas Detector

3. Measure range: 0-100%LEL

4. Display: Monochrome dot matrix 128*128 LCD graphic display.

5. Backlight: Time of backlight is settable, when alarm the backlight will be auto on.

6. Data recording: Storage capacity of over one hundred thousand sets. Interval time ranges from                   0-   100%VOL seconds are settable. (Optional function extra cost )

7. Alarm recording: can record 10000 set alarm records, the record can be checked on the device.                  

         (Optional function)

8. Language: English

9. Alarm type: sound, light, vibration.

10. Battery: 3.7V rechargeable lithium battery, with a capacity of 2300mAh.

11.Working Time: 14h continuously

12.Charger: travel charger with USB. Charging time: 4~6h

13.Explosion-proof grade: Explosion-proof grade： ExiaⅡCT3

14.Protection grade: Protection grade： IP65

15.Working temperature: Working temperature：-20℃～50℃

16.Working humidity: 0-90%RH (Non-condensing, a filter dryer is needed in an environment of humidity

17.Housing Material: Housing Material: ABS+ leather case

18.Dimension: Dimension: 131*83*35mm（length*width*height)

     Weight: Weight：240g

Product Details:

·        Sampling method: Diffusion

·        Detected gas: SO2, NO

·        Detection principle: Electrochemical (SO2, NO)

·        Measure range: SO2 0-100PPM,NO 0-200PPM

·        Precision: 5% F.S.

·        Display: Monochrome dot matrix 128*128 LCD graphic display.

·        Backlight: Time of backlight is settable, when alarm the backlight will be auto on.

·        Data recording: Storage capacity of over one hundred thousand sets. Interval time ranges from 10~3600 seconds are settable. (Optional function)

·        Alarm recording: can record 10000 set alarm records, the record can be checked on the device. (Optional function)

·        Language: English

·        Alarm type: sound, light, vibration.

·        Battery: 3.7V rechargeable lithium battery, with a capacity of 2300mAh.

·        Working Time: 14h continuously (common 4 gases). 200h(without LEL sensor)

·        Charger: travel charger with USB. Charging time: 4~6h

·        Explosion-proof grade: Explosion-proof grade： ExiaⅡCT3

·        Protection grade: Protection grade： IP65

·        Working temperature: Working temperature：-20℃～50℃

·        Working humidity: 0-90%RH (Non-condensing, a filter dryer is needed in an environment of humidity

·        Housing Material: Housing Material: ABS+ leather case

·        Dimension: Dimension: 131*83*35mm（length*width*height)

·        Weight: Weight：240g

Product Details:

1. Gas Detected: Hexane 2. Detection Principle: catalytic combustion, 3. Measure range: 0-100PPM 4. Resolution: 0.01PPM 5. Display: LED display 6. Protection grade：IP66/67 7. Communication mode：4-20mA(3-wires) 、RS485 1～5V，Hart (Optional) 8. Wireless: LORA, GPRS/4G(Optional) 9. Working voltage: 12-24VDC 10. Contact capacity: standard with 1 set of relay signals, optional with 2 sets of relay signals 11. Working temperature: -40℃～70℃（Catalytic sensor) 12. Working pressure: 86kPa~106kPa 13. Housing material: Die casting aluminium 14. Electrical interface: standard internal screw thread M20 * 1.5, optional 1/2NPT internal thread, G3/4, G1/2, 3/4NPT 15. Explosion-proof grade：IECEX：Ex db IIC T6 Gb，Ex db ia IIC T6 Gb ； ATEX：Ex db IIC T6 Gb，Ex db ia IIC T6
Gb 16. Size: 157.8x128.8x69.6mm 17. Weight: about 1.0Kg

Additional Information:

• Item Code: MISG100C6H14

Product Details:

Gas Detection : O2 oxygen

Measure range: 0-30%VOL Resolution:0.01%VOL

1. Sensor Principle: Electrochemical

2. Data display, with one set of relay output

3. Power supply: 24V DC

4. Signal output: 4-20mA

5. Dimension of product: 180×150×90mm

6. Dimension of packing: 30x22x15cm

7. Gross Weight: 4KG

8. Net Weight: 1.6KG

9. Working temperature: -40~+65??? Humidity: 0-95%RH

10. Approvals: ATEX

11. Protection: IP65

Additional Information:

• Delivery Time: 2 TO 3 WEEKS
• Packaging Details: STANDARD

Product Details:

1. Gas Detected: O2/Oxygen 2. Detection Principle: electrochemical 3. Measure range: 0-25%vol 4. Resolution: 0.01%VOL 5. Display: LED display 6. Protection grade：IP66/67 7. Communication mode：4-20mA(3-wires) 、RS485 1～5V，Hart (Optional) 8. Wireless: LORA, GPRS/4G(Optional) 9. Working voltage: 12-24VDC 10. Contact capacity: standard with 1 set of relay signals, optional with 2 sets of relay signals 11. Working temperature: -40℃～70℃（Catalytic sensor) 12. Working pressure: 86kPa~106kPa 13. Housing material: Die casting aluminium 14. Electrical interface: standard internal screw thread M20 * 1.5, optional 1/2NPT internal thread, G3/4, G1/2, 3/4NPT 15. Explosion-proof grade：IECEX：Ex db IIC T6 Gb，Ex db ia IIC T6 Gb ； ATEX：Ex db IIC T6 Gb，Ex db ia IIC T6 Gb 16. Size: 157.8x128.8x69.6mm 17. Weight: about 1.0Kg